Description
Merchandise Description
Product Description:
one. Flexspline is a hollow flanging standard cylinder structure.
two. There is a big-diameter hollow shaft hole in the middle of the cam of the wave generator. The inside design of the reducer has a assist bearing.
three. It has a fully sealed construction and is effortless to set up. It is quite suitable for events the place the wire demands to be threaded from the centre of the reducer.
Advantages:
one. Substantial precision,substantial torque
2. Devoted technical staff can be on-the-go to give style options
3. Manufacturing unit direct income wonderful workmanship sturdy quality assurance
four. Solution good quality problems have a a single-calendar year warranty time, can be returned for substitution or repair
Business profile:
HangJCPT Homwing Technologies Co., Ltd. set up in 2014, is fully commited to the R & D plant of substantial-precision transmission parts. At current, the yearly manufacturing capacity can achieve 45000 sets of harmonic reducers. We firmly think in top quality first. All hyperlinks from raw materials to concluded items are strictly supervised and controlled, which offers a sound basis for product good quality. Our products are sold all over the region and abroad.
The harmonic reducer and other high-precision transmission components have been independently produced by the business. Our business spends twenty% of its revenue every single 12 months on the study and growth of new technologies in the market. There are five individuals in R & D.
Our gain is as beneath:
1.seven a long time of advertising and marketing experience
2. 5-person R & D crew to offer you with technical assist
3. It is bought at house and overseas and exported to Turkey and Eire
4. The product good quality is guaranteed with a one-yr warranty
5. Goods can be JCPTized
Toughness manufacturing facility:
Our plant has an whole campus The quantity of workshops is all around 300 Whether it really is from the production of uncooked components and the procurement of uncooked components to the inspection of concluded goods, we are performing it ourselves. There is a complete creation technique
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Permitted peak torque at start cease | The allowable optimum of the average load torque | Optimum torque is allowed in an instant | Enable the maximum velocity to be entered | Typical input speed is authorized | Again hole | layout daily life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
fourteen | 50 | six.two | .six | 20.seven | 2.1 | 7.nine | .seven | forty.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
eighty | 9 | .9 | 27 | two.seven | twelve.7 | one.three | 54.1 | 5.5 | |||||
one hundred | nine | .9 | 32 | 3.3 | 12.7 | one.3 | sixty two.one | six.three | |||||
17 | fifty | eighteen.four | 1.nine | 39 | four | 29.9 | three | eighty.five | eight.2 | 6500 | 3000 | ≤30 | 15000 |
eighty | twenty five.three | two.6 | 49.five | five | 31 | 3.2 | 100.one | 10.2 | |||||
a hundred | 27.six | 2.eight | 62 | 6.3 | forty five | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.eight | 2.nine | 64.four | six.six | 39 | four | 112.seven | 11.5 | 5600 | 3000 | ≤30 | 15000 |
eighty | 39.1 | four | eighty five | eight.eight | fifty four | 5.five | 146.1 | 14.nine | |||||
a hundred | forty six | 4.7 | 94.three | nine.6 | fifty six | 5.eight | 169.1 | 17.two | |||||
one hundred twenty | 46 | four.7 | 100 | ten.2 | fifty six | five.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | ten.2 | 56 | 5.eight | 169.1 | 17.2 | |||||
25 | 50 | forty four.9 | 4.6 | 113 | eleven.5 | 63 | six.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | seventy two.5 | seven.4 | 158 | sixteen.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
a hundred | seventy seven.1 | seven.nine | 181 | eighteen.four | 124 | twelve.seven | 326.six | 33.3 | |||||
a hundred and twenty | 77.one | 7.nine | 192 | 19.6 | 124 | twelve.7 | 349.6 | 35.six | |||||
32 | 50 | 87.4 | 8.nine | 248 | 25.three | 124 | twelve.7 | 439 | forty four.8 | 4000 | 3000 | ≤30 | 15000 |
eighty | one hundred thirty five.seven | 13.8 | 350 | 35.six | 192 | 19.6 | 653 | 66.six | |||||
100 | 157.six | sixteen.one | 383 | 39.one | 248 | 25.3 | 744 | 75.9 | |||||
40 | a hundred | 308 | 37.two | 660 | sixty seven | 432 | forty four | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Pace ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start off end | The allowable highest of the common load torque | Highest torque is allowed in an instant | Permit the optimum pace to be entered | Typical enter pace is allowed | Again gap | layout life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
fourteen | 50 | seven | .seven | 23 | 2.three | 9 | .nine | forty six | four.7 | 14000 | 8500 | ≤20 | 15000 |
eighty | 10 | one | 30 | 3.one | fourteen | 1.four | sixty one | six.2 | |||||
100 | ten | one | 36 | 3.seven | 14 | one.4 | 70 | seven.2 | |||||
seventeen | fifty | 21 | 2.one | forty four | 4.five | 34 | 3.4 | 91 | 9 | ten thousand | 7300 | ≤20 | 20000 |
eighty | 29 | two.9 | 56 | 5.seven | 35 | 3.6 | 113 | 12 | |||||
a hundred | 31 | three.2 | 70 | 7.2 | 51 | five.2 | 143 | 15 | |||||
20 | 50 | 33 | three.three | 73 | 7.4 | forty four | 4.5 | 127 | thirteen | 10000 | 6500 | ≤20 | 20000 |
eighty | 44 | four.five | ninety six | nine.8 | sixty one | six.two | 165 | 17 | |||||
100 | 52 | five.three | 107 | 10.nine | 64 | 6.five | 191 | 20 | |||||
one hundred twenty | 52 | five.3 | 113 | eleven.5 | sixty four | six.five | 191 | 20 | |||||
160 | fifty two | five.3 | 120 | 12.two | 64 | 6.5 | 191 | twenty | |||||
twenty five | 50 | 51 | 5.2 | 127 | thirteen | seventy two | seven.three | 242 | twenty five | 7500 | 5600 | ≤20 | 20000 |
eighty | 82 | eight.4 | 178 | 18 | 113 | twelve | 332 | 34 | |||||
one hundred | 87 | eight.nine | 204 | 21 | 140 | fourteen | 369 | 38 | |||||
one hundred twenty | 87 | eight.9 | 217 | 22 | one hundred forty | 14 | 395 | 40 | |||||
32 | 50 | ninety nine | 10 | 281 | 29 | one hundred forty | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | sixteen | 395 | 40 | 217 | 22 | 738 | seventy five | |||||
one hundred | 178 | 18 | 433 | forty four | 281 | 29 | 841 | 86 | |||||
40 | one hundred | 345 | 35 | 738 | 75 | 484 | forty nine | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibitions:
Software case:
FQA:
Q: What should I supply when I decide on a gearbox/pace reducer?
A: The greatest way is to give the motor drawing with parameters. Our engineer will check and suggest the most appropriate gearbox product for your reference.
Or you can also offer the beneath specification as nicely:
one) Kind, product, and torque.
2) Ratio or output velocity
three) Working issue and connection technique
four) Top quality and mounted equipment identify
5) Enter mode and enter velocity
six) Motor brand product or flange and motor shaft dimensions