Description
Item Description
Agricultural Aluminum Alloy Situation Sealing Dust-proof Centre-Dive Equipment Box Of Irrigation System
Model Numbers:
SYF-one-20=87rpm(20:one ratio)
SYF-one-thirty=58rpm(thirty:1 ratio)
SYF-one-40=43rpm(forty:1 ratio)
SYF-one-fifty=35rpm(fifty:1 ratio)
SYF-1-fifty eight=30rpm(fifty eight:1 ratio)
SYF-1-60=29rpm(sixty:one ratio)
(When input pace is 1740 rpm)
Efficiency:
1. Torque capacity: 4,500 lb.in (510 N.m).
2. Ratio: twenty:1,?thirty:1,?40:1,?fifty:one,?fifty eight:one, 60:one (others obtainable).
three. Accepts NEMA fifty six-C experience motors with .625″shafts, 2″ prolonged with .19″ crucial slot.
four. Multiple mount bolt designs five”×6″, three.38″×6.38″suit all pivots.
5. High energy aluminum bronze worm gear.
This variety of worm gear box has been widely used on the driveline (push practice) of the center pivot irrigation method and the linear go (afterwards transfer) irrigation system on North America, European area and Middle East. It employs aluminum alloy scenario and major transmission areas are made from large energy alloy. By use of massive variety sealing and dust-evidence devices it characteristics mild in bodyweight, lengthy services existence and great tightness as effectively.
Gear Materials
20CrMnTi/20CrMnMo for your decision
CASTINGS Components
Grey cast iron HT250 in accordance to common GB/T 1348-2009 Ductile iron QT450-ten according to common GB/T 1348-2009 Solid steel ZG310-570 according to normal GB/T 5613-2014
SHAFTS Materials
40Cr,45#,20CrMnTi,20CrMnMo for your decision in accordance to your ask for.
Electrical power To guarantee the appropriate use of the merchandise we recommand to pay interest to the specifications mentioned on our technological sheet.Consider also the input rotation pace,the energy enter and the transmission ratios.The place the rotation or other functioning problems are different,remember to speak to LongQuan technical department.
LUBRICATION
The reducer is normally provided with out lubricant.The recommended quantity of lubricant is indicated on our catalogue and the 1st changed should be accomplished soon after fifty-sixty several hours of operating,then replaced following 600-800 functioning several hours. The emptying of the gearbox ought to be manufactured quickly right after the operating,with the oil even now sizzling,in purchase to stay away from the deposition of sludge.Check regularly the oil amount and prime up the oil anytime needed.
Connected Goods
Manufacturing facility
Comprehensive use for agricultural equipment
Guarantee: Substantial precision, substantial dress in resistance, lower noise, smooth and constant, substantial energy
Our manufacturing facility
