Description
PTO Shaft Replacement Of Weasler 35 Series
The 35 series Yoke & Tube Assembly is a reliable PTO drive shaft yoke that is made to last. This PTO yoke features a 1-2/9 in. square bore for easy connection.
- Shaft Length: Centerline (Center of yoke ear hole to the back of tube) 34-2/3 in.
- Tube Outer Diameter: 2-1/9 in.
- Tube Inner Diameter: 1-2/9 in. square
- PTO drive shaft yoke operates at 108 HP/81 kilowatts @ 1000RPM or 70 HP/52 kilowatts @ 540 RPM for efficiency
- PTO yoke weight: 12.06 lb.
What equipment will the driveline be used for?
If you know which piece of equipment the power train will be used for and want to replace the whole power train, recognition is a fast two-step process:
Just select the equipment category, and then select the pipe shape (see the figure below) and length of the driveline to be replaced.
If you need to replace driveline components, refer to the following identification process.
What are the various driveline components?
1. The tractor yoke– PTO assembly starts with this type of yoke. It is connected to the tractor and used to connect the power train. There are two main types of tractor yokes. The first type is a spring lock, which uses a spring-loaded collar to connect and release the yoke. The second type is a quick to disconnect, which uses a pushpin mechanism to connect.
The tractor yoke can also be designated as 6-spline, 20-spline, or 21-spline, representing how it matches to the connection on the tractor. This can be identified by counting the notches on the inside of the yoke collar.
2. Cross and Bearing Kit- This is a u-joint that connects the yokes in the PTO assembly. The cross and bearing kit will either have a snap ring located internally in the bushing or located externally, meaning it can be found in the ears of the yoke.
3. Shaft Yoke- Using a cross and bearing kit, this connects the tractor yoke to the driveline shaft.
4. Shaft- The shaft is the metal rod at the core of the driveline providing its length and connecting the yoke attachments.
5. Tube- The shaft runs inside this metal cylinder adding reinforcement to the driveline
6. Tube Yoke- Attached to the end of the tube, this yoke connects the driveline to the implementation using a second cross and bearing kit.
7. Implement Yoke- This connects the driveline to the machine or device being maneuvered by the tractor.
8. Guard- A hard plastic covering is placed around the driveline to prevent damage during operation.
Is the Driveline North American or Metric?
The simplest way to figure out whether a PTO is North American or metric is to determine the shape of the tubing and shafting. A PTO is domestic if the tubing/shafting is square, rectangle, hex, or splined. If the tubing/shafting is a bell, lemon, or star-shaped, then it is metric. There are two types of metric drivelines: German-style (Walterscheid brand) and Italian style (Bondioli & Pavesi). The German-style shafting/tubing has lemon and star profiles while the Italian has a bell-shaped design.
What series is the power train?
The exact way to determine which series of PTO to use is to take two measurements of the spider and bearing kit on the tractor end of the driveline. Use a caliper to measure the outer diameter of the universal joint cover, which is the same as measuring the inner hole of the yoke ear.
PTO Shaft Parts
▎35N / 2200 Series PTO Driveline Parts
59Hp@540rpm 111Hp@1000rpm |
Part Number |
Cup Diameter |
Length (B) |
Snap Ring |
Series | Type |
2-2275 | 1.250 | 3.219 | outside | 35N / 2200 | ||
2-2276 | 1.250 | 3.219 | outside | 35N / 2200 | zerk in cap | |
200-3500 | 1.250 | 3.219 | outside | 35N / 2200 | ||
200-3501 | 1.250 | 3.219 | inside | 35N / 2200 |
▎35N / 2200 Square or Rectangular Parts
Bar Yoke # | Solid Shaft | OD Spec | Square Sleeve | Tube Yoke |
Shield | Shield Bearing | Length | Shield Bearing ID |
902-2548 | 921-1200 | 48 | 2.050 |
69-2248 | 56-2200 | 60 | 2.050 |
▎35N / 2200 Splined Parts
|
||||
Bar Yoke # | Solid Shaft | OD Spec | Square Sleeve | Tube Yoke |
301-3500 | 404-2120 | 1.375-20 spline | 502-3500 | 701-3500 |
302-3500 | 404-2720 | 1.6875-20 spline | 505-3500 | 704-3500 |
Shield | Shield Bearing | Length | Shield Bearing ID |
902-2548 | 921-1200 | 48 | 2.050 |
69-2248 | 56-2200 | 60 | 2.050 |
▎35N / 2200 Series Quick Disconnect Yokes
Part Number | Diameter | No of Splines | C-E Length | QD Type |
101-3521 | 1.375 | 21 | 5.125 | collar |
22-2312 | 1.375 | 6 | 4.750 | pin |
101-3506 | 1.375 | 6 | 5.125 | collar |
101-3520 | 1.750 | 20 | 6.125 | collar |
35N / 2200 Series Hex QDs | ||||
102-3518 | 1.125 | 4.750 | pin |
▎35N / 2200 Series Clamp Yokes
35 / 2200 Splined Clamp Yokes | |||
Part Number | Diameter | No of Splines | Notes |
35351-1011 | 1.25 | 15 | splined |
807-3521 | 1.375 | 21 | splined |
807-3506 | 1.375 | 6 | splined |
22-1140 | 1.375 | 6 | splined |
22-1105 | 1.375 | 21 | splined |
35191-2256 | 1.53 | 23 | splined |
807-3520 | 1.750 | 20 | splined |
807-3527 | 1.750 | 27 | splined |
35N / 2200 Round Clamp Yokes | |||
Part Number | Diameter | Keyway | Notes |
35011-2029 | 1.375 | .375 | OBSOLETE |
35351-1010 | 1.375 | .375 | interfering |
211U9 | 1.50 | .375 | interfering |
35191-1788 | 1.50 | .375 | round |
35N / 2200 Hex Clamp Yokes | |||
Part Number | Diameter | c-e Length | Notes |
35351-1001 | 1.125 | 3.00 | clamp |
▎35N / 2200 Series Straight Bores
35N / 2200 Series Round Bores |
|||
Part Number | Bore | Key | (c-e) Length |
800-3516 | 1.00 | .250 | 4.250 |
Y324 | 1.25 | 3.5 | |
806-3520 | 1.250 | .250 / .312 | 4.250 |
806-3522 | 1.375 | .312 / .375 | 4.250 |
800-3523 | 1.4375 | .375 | 4.250 |
800-3524 | 1.500 | .375 | 4.250 |
800-3526 | 1.625 | .375 | 4.250 |
800-3528 | 1.750 | .375 | 4.250 |
35N / 2200 Series Splined Bores |
|||
Part Number | Diameter | Splines | (S) Length |
Y311 | 1.375 | 6 | 3.00 |
801-3506 | 1.375 | 6 | 4.250 |
801-3521 | 1.375 | 21 | 4.250 |
Y322 | 1.375 | 21 | 3.375 |
35331-1443 | 1.375 | 6 | 5.25 |
Y345 | 1.5 | 17 | 2.4375 |
35011-1153 | 1.5 | 23 | 4.250 |
35N / 2200 Series Hex Bores |
|||
Part Number | Diameter | c-e Length | Clamp Type |
35011-2193 | 1.125 | no |
▎35N / 2200 Series Yokes
35N / 2200 Series H Yokes | ||
Part Number | Length | |
14061-1588 | 1.875 | |
35N / 2200 Series Flange Yokes | ||
35N / 2200 Series Shear Bolt Yokes | ||
PTO Shaft for Agricultural Gearbox
Agricultural equipment such as tractors, combines, and harvesters use the PTO shaft. These components are subjected to high loads and stress, and it is vital to find out why they failed in the first place. Constant shaft compression can damage connecting shafts and even the tractor and implement. A PTO shaft for an agricultural gearbox is an integral part of an agricultural implement or tractor. And PTO shaft for the agricultural gearbox is secured with a safety shield at both ends and can be found on implements and tractors. A PTO shaft can be welded to the drive end by using a universal joint, while the rear shaft can be welded directly to the tractor.