Beschreibung
Zapfwelle für New Holland Scheibenmäher
Our drive PTO shafts can be adapted to the following disc mower models：
New Holland Discbines 1431, 1432 Model 411, 1409, 1410, 1411, 1412, 1441, 1442, 1431, 143
H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560
Case IH DC 132,
All disciplines use multiple PTO shafts and a combination clutch.
The types of PTOs and clutch locations vary from model to model.
Models below were originally equipped with Weasler and or Bondioli & Pavesi PTOs.
| Teilenummer | Traktor | Implement | Beschreibung |
| New Holland Discbines 1431, 1432 | |||
| 14656853 | 1.375-21 | 1.5″ x 23 spline | 55N 80×50 Double CV |
| 82-14656853 | none | 1.5″ x 23 spline | 55N 50 degrees CV half(implement) |
| 83-14656853 | 1.375-21 | none | 55N 80 degrees CV half(tractor) |
| 83-14756853 | 1.750-20 | none | 55N 80 degrees CV half(tractor) |
| New Holland Discbines Model 411 | |||
| 14656853 | 1.375-21 | 1.5″ x 23 spline | 55N 80×50 Double CV |
| 82-14656853 | none | 1.5″ x 23 spline | 55N 50 degrees CV half(implement) |
| 83-14656853 | 1.375-21 | none | 55N 80 degrees CV half(tractor) |
| 83-14756853 | 1.750-20 | none | 55N 80 degrees CV half(tractor) |
| 857-5521 | none | 1.375-21 | 55N 50 degrees CV clamp yoke only |
| New Holland Discbines 1409, 1410, 1411, 1412, 1441, 1442 | |||
| 55N-NH14XX-DISCBINE | 1.375-6 | none | CAT6 CV with 1.375-21 yoke |
| 14656848 | 1.375-21 | none | 55N CV without implementing yoke |
| 14756848 | 1.750-20 | none | 55N CV without implementing yoke |
| New Holland Discbines H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560 | |||
| 14605548 | 1.375-21 | none | 55N CV without implementing yoke |
| 14705548 | 1.375-21 | none | 55N CV without implementing yoke |
| Modell: | Primary | Intermediate | Secondary | HP | Drehzahl |
|---|---|---|---|---|---|
| H7220 |
35N CV
|
35N Square
|
65
|
540
|
|
| H7230 |
55N CV or standard
|
Jack style 1.375-21 |
H8 double CV
|
80
|
540/1000
|
| H7320 |
35N CV
|
35N Square
|
65
|
540
|
|
| H7330 |
55N CV or standard
|
Jack Style 1.375-21 |
H8 double CV
|
80
|
540/1000
|
| H7450 |
55N Double 80/50 CV or 55N standard (for swivel) |
55N standard
|
90
|
1000
|
|
| H7460 |
55N Standard
|
55N Square w/clutch
|
55N Standard
|
100
|
1000
|
| H7550 |
55N Double 80/50 CV or 55N standard (for swivel) |
55N standard
|
55N standard
|
90
|
1000
|
| H7560 |
55N Standard
|
55N Square w/clutch
|
55N standard
|
100
|
1000
|
As we all know, at present, everyone attaches great importance to farmland production, especially in planting, harvesting, and maintenance, which is an important part of output improvement. However, we must also find that today’s farmland is no longer a busy life of farmers suffering, but a large area of farmland is only cultivated with machinery and equipment. Individual operators and farmers are present to cooperate in the operation, which shows the importance of agricultural machinery. Then there is the use of universal driveshafts in agricultural machinery. For example, the sprayer, mower, harvester, field returning machine, and so on will be equipped with the ever-power transmission shaft. However, due to the different structures and uses of various agricultural machinery, the ever power transmission shaft selected is also different. Therefore, there are many categories of Ever power transmission shafts. You can select the appropriate Ever power transmission shaft according to the model used.
Zapfwellenanwendung
Agricultural Gearbox and PTO Shafts
PTO shafts are used in agricultural equipment such as tractors, combines, and harvesters. These components are subjected to high loads and stress, and it is vital to find out why they failed in the first place. Constant compression of the shaft can damage connecting shafts and even the tractor and implement. A PTO shaft for agricultural gearbox is an integral part of an agricultural implement or tractor. And PTO shaft for Landwirtschaftliches Getriebe is secured with a safety shield at both ends and can be found on implements and tractors. A Zapfwelle can be welded to the drive end by using a universal joint, while the rear shaft can be welded directly to the tractor.
If you also need the agricultural gearboxes, please click here：https://hzpt.com/agricultural-pto-gearbox/ and feel free to contact us!
Zapfwelle Hersteller
Ever Power ist ein Industrieunternehmen, das Präzisionsguss, Präzisionsschmieden und Zerspanung integriert. Das Unternehmen verfügt über mehr als 100 Anlagen, darunter Dreh-, Fräs-, Schleif-, Hobel-, Zieh- und CNC-Maschinen, einen Mittelfrequenz-Elektroofen, eine Gießanlage, eine 1000-Tonnen-Reibungspresse, eine Beschichtungsanlage usw. Das Unternehmen produziert hauptsächlich Kreuzgelenke, Antriebswellen, Pflugwellen, Keilwellen, Präzisionsgussteile, Gesenkschmiedeteile und weitere Produkte für Landmaschinen. Das Sortiment umfasst über 100 verschiedene Produkte aus elf Serien, darunter Kreiselgrubber, Pulper, Feldumwälzmaschinen, Rasenmäher usw. Die jährliche Produktionskapazität beträgt 120.000 Kreuzgelenke, 4000 Tonnen Präzisionsgussteile und 4000 Tonnen Gesenkschmiedeteile. Ever Power folgt dem Unternehmensmotto „Menschenorientierung, Einheit und Zusammenarbeit, Exzellenz“ und dem Grundsatz „Qualität siegt, Ehrlichkeit und Vertrauenswürdigkeit, Kunde zuerst“. Wir haben die Geschäftsphilosophie etabliert, Kundenbedürfnisse in den Mittelpunkt zu stellen, um einen kundenorientierten Service zu bieten. Wir freuen uns auf die Zusammenarbeit mit neuen und bestehenden Kunden für eine gemeinsame Weiterentwicklung!
