China Flange Mounting Foot Mounting High Torque Helical Geared Motor Reduction Gearbox with Good quality

Product Description

Model Information

1) Made of high quality material, non-rusting;Both flange and foot mounting available and suitable for all-round installation
2) Large output torque and high radiating efficiency
3)Precise grinding helical gear with Smooth running and low noise, no deformation,can work long time in dreadful condition
4)Nice appearance, durable service life and small volume, compact structure
5)Both 2 and 3 stage available with wide ratio range from 5 to 200
6)Different output shaft diameter available -40-50mm
7)Modular construction enlarge ratio from 5 to 1400

MAIN MATERIALS:
1)housing with aluminium alloyand cast iron material;
2)Output Shaft Material:20CrMnTi
3)Good quality no noise bearings to keep long service life
4)High performance oil seal to prevent from oil leakage

APPLICATIONS:
G3 Series helical gear motor are wide used for all kinds of automatic equipment, such as chip removal machine, conveyor, packaging equipment, woodworking machinery, farming equipment, slurry scraper ,dryer, mixer and so on.

(n1=1400r/min 50hz)
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	46	35	28	23	18	14	–	11	9	7
	M2(Nm)	50hz	3.2	6.5	9.8	12.9	16.1	19.6	25.7	31.1	37.5	49.5	62.9	–	76.1	100.7	125.4
	M2(Nm)	60hz	3	5	8	11	13	17	21	26	31	41	52	–	63	84	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	8	7
	M2(Nm)	50hz	6.5	12.6	19.1	26.3	32.6	38.9	50.4	63	75.6	100.8	103.9	125.4	150	200.4	250.7
	M2(Nm)	60hz	5.4	10.5	16.6	21.9	27.1	32.4	42	52.5	63	84	86.6	104.5	125	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	M2(Nm)	50hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
	M2(Nm)	60hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	140	94	69	58	46	35	29	24	18	14	14	11	9	7
	M2(Nm)	50hz	24.6	48.2	72.9	97.5	122.1	145.7	187.5	235.7	282.9	376.1	387.9	439	527	703	764
	M2(Nm)	60hz	20.5	40.2	60.7	81.3	201.8	121.4	156.3	196.4	235.7	313.4	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4571	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	140	93	70	55	47	34	27	24	17	14	13	12	8	7
	M2(Nm)	50hz	48.2	97.5	145.7	193.9	242.1	272	351	439	527	703	724	878	1060	1230	1230
	M2(Nm)	60hz	40.2	81.3	121.4	161.6	201.8	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	20	25	30	40	50	60	80	100
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	68	54	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1571	1230
	M2(Nm)	60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4571	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
0.1kw	Ø18	5–30-40-50	236	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	157	80	81
0.1kw	Ø22	-160-200	262	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
0.2kw	Ø18	5-	267	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	161	80	81
	Ø22	-80-100	293	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
	Ø28		306	309.5	208.5	11	23.5	215	4	15	45	170	50	28	31	129	8	198.5	105.5	88
0.4kw	Ø22	5-	314	324.5	204	11	19	185	4	12	40	148	47	22	24.5	139	6	171.5	89.5	88.5
	Ø28	-80-100	330	337.5	215	11	23.5	215	4	15	45	170	50	28	31	139	8	198.5	105.5	93
	Ø32		349	357	229.5	13	28.5	250	4	15	55	180	60	32	35	139	10	234	126	98
0.75kw	Ø28	5-	350.5	343.5	227.5	11	23.5	215	4	15	45	170	50	28	31	159	8	198.5	105.5	103
	Ø32	-80-100	379.5	387	242	13	28.5	250	4	15	55	180	60	32	35	159	10	234	126	108
	Ø40		401.5	408.5	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
1.5kw	Ø32	5-	420.5	441	254	13	28.5	250	5	15	55	180	60	32	35	185	10	234	126	121
	Ø40	-80-100	457.5	478	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
	Ø50		485.5	506	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5
2.2kw	Ø40	5-	466.5	487	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
2.2kw	Ø50	-80-100	510.5	531	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5

G3LM: THREE PHASE GEAR MOTOR WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
0.1kw	Ø18	5–30-40-50	236	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
0.1kw	Ø22	-160-200	262	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
0.2kw	Ø18	5-	267	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
	Ø22	-80-100	293	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
	Ø28		306	309.5	90	140	175	23.5	125	11	65	45	28	31	129	203	8	170	110	15
0.4kw	Ø22	5-	314	324.5	65	130	155	19	90	11	55	40	22	24.5	139	199.5	6	141.5	90	12
	Ø28	-80-100	330	337.5	90	140	175	23.5	125	11	65	45	28	31	139	210	8	170	110	15
	Ø32		349	357	130	170	208	28.5	170	13	70	55	32	35	139	226	10	198	130	18
0.75kw	Ø28	5-	350.5	343.5	90	140	175	23.5	125	11	65	45	28	31	159	222	8	170	110	15
	Ø32	-80-100	379.5	387	130	170	208	28.5	170	13	70	55	32	35	159	238.5	10	198	130	18
	Ø40		401.5	408.5	150	210	254	34	196	15	90	65	40	43	185	249	12	230	150	20
1.5kw	Ø32	5-	420.5	441	130	170	208	28.5	170	13	70	55	32	35	185	250.5	10	198	130	18
	Ø40	-80-100	457.5	478	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
	Ø50		485.5	506	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25
2.2kw	Ø40	5-	466.5	487	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
2.2kw	Ø50	-80-100	510.5	531	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25

Outline and mounting dimension:

Packing

HangZhou CZPT Mechanical & Electrical Co., Ltd is located in HangZhou, ZHangZhoug, the cradle of the private economy. Our company With an innovative leadership team, modern management system, high-quality workforce, complete production facilities, complete inspection equipment, strong technical force, reliable product quality, superb offers variety of products which can meet your multifarious demands. We adhere to the management principles of “quality first, customer first and credit-based” since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a CZPT situation since the trend of economic globalization has developed with an irresistible force.

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.

2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.

3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.

4.Q:What’s your production capacity?
A:4000-5000 PCS/MONTH.

5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost.

6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

US $2,000
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal Type
Layout:	Coaxial
Gear Shape:	Horizontal Type
Step:	Two Stage-Three Stage

###

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

###

(n1=1400r/min 50hz)
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	46	35	28	23	18	14	–	11	9	7
	M2(Nm)	50hz	3.2	6.5	9.8	12.9	16.1	19.6	25.7	31.1	37.5	49.5	62.9	–	76.1	100.7	125.4
	M2(Nm)	60hz	3	5	8	11	13	17	21	26	31	41	52	–	63	84	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	8	7
	M2(Nm)	50hz	6.5	12.6	19.1	26.3	32.6	38.9	50.4	63	75.6	100.8	103.9	125.4	150	200.4	250.7
	M2(Nm)	60hz	5.4	10.5	16.6	21.9	27.1	32.4	42	52.5	63	84	86.6	104.5	125	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	M2(Nm)	50hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
	M2(Nm)	60hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	140	94	69	58	46	35	29	24	18	14	14	11	9	7
	M2(Nm)	50hz	24.6	48.2	72.9	97.5	122.1	145.7	187.5	235.7	282.9	376.1	387.9	439	527	703	764
	M2(Nm)	60hz	20.5	40.2	60.7	81.3	201.8	121.4	156.3	196.4	235.7	313.4	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4020	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	140	93	70	55	47	34	27	24	17	14	13	12	8	7
	M2(Nm)	50hz	48.2	97.5	145.7	193.9	242.1	272	351	439	527	703	724	878	1060	1230	1230
	M2(Nm)	60hz	40.2	81.3	121.4	161.6	201.8	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	20	25	30	40	50	60	80	100
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	68	54	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1029	1230
	M2(Nm)	60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4020	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
0.1kw	Ø18	5-10-15-20-25-30-40-50	236	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	157	80	81
0.1kw	Ø22	60-80-100-120-160-200	262	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
0.2kw	Ø18	5-10-15-20-25	267	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	161	80	81
	Ø22	30-40-50-60-80-100	293	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
	Ø28	100-120-160-200	306	309.5	208.5	11	23.5	215	4	15	45	170	50	28	31	129	8	198.5	105.5	88
0.4kw	Ø22	5-10-15-20-25	314	324.5	204	11	19	185	4	12	40	148	47	22	24.5	139	6	171.5	89.5	88.5
	Ø28	30-40-50-60-80-100	330	337.5	215	11	23.5	215	4	15	45	170	50	28	31	139	8	198.5	105.5	93
	Ø32	100-120-160-200	349	357	229.5	13	28.5	250	4	15	55	180	60	32	35	139	10	234	126	98
0.75kw	Ø28	5-10-15-20-25	350.5	343.5	227.5	11	23.5	215	4	15	45	170	50	28	31	159	8	198.5	105.5	103
	Ø32	30-40-50-60-80-100	379.5	387	242	13	28.5	250	4	15	55	180	60	32	35	159	10	234	126	108
	Ø40	100-120-160-200	401.5	408.5	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
1.5kw	Ø32	5-10-15-20-25	420.5	441	254	13	28.5	250	5	15	55	180	60	32	35	185	10	234	126	121
	Ø40	30-40-50-60-80-100	457.5	478	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
	Ø50	100-120-160-200	485.5	506	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5
2.2kw	Ø40	5-10-15-20-25	466.5	487	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
2.2kw	Ø50	30-40-50-60-80-100	510.5	531	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
0.1kw	Ø18	5-10-15-20-25-30-40-50	236	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
0.1kw	Ø22	60-80-100-120-160-200	262	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
0.2kw	Ø18	5-10-15-20-25	267	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
	Ø22	30-40-50-60-80-100	293	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
	Ø28	100-120-160-200	306	309.5	90	140	175	23.5	125	11	65	45	28	31	129	203	8	170	110	15
0.4kw	Ø22	5-10-15-20-25	314	324.5	65	130	155	19	90	11	55	40	22	24.5	139	199.5	6	141.5	90	12
	Ø28	30-40-50-60-80-100	330	337.5	90	140	175	23.5	125	11	65	45	28	31	139	210	8	170	110	15
	Ø32	100-120-160-200	349	357	130	170	208	28.5	170	13	70	55	32	35	139	226	10	198	130	18
0.75kw	Ø28	5-10-15-20-25	350.5	343.5	90	140	175	23.5	125	11	65	45	28	31	159	222	8	170	110	15
	Ø32	30-40-50-60-80-100	379.5	387	130	170	208	28.5	170	13	70	55	32	35	159	238.5	10	198	130	18
	Ø40	100-120-160-200	401.5	408.5	150	210	254	34	196	15	90	65	40	43	185	249	12	230	150	20
1.5kw	Ø32	5-10-15-20-25	420.5	441	130	170	208	28.5	170	13	70	55	32	35	185	250.5	10	198	130	18
	Ø40	30-40-50-60-80-100	457.5	478	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
	Ø50	100-120-160-200	485.5	506	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25
2.2kw	Ø40	5-10-15-20-25	466.5	487	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
2.2kw	Ø50	30-40-50-60-80-100	510.5	531	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25

US $2,000
/ Piece
| 5 Pieces

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal Type
Layout:	Coaxial
Gear Shape:	Horizontal Type
Step:	Two Stage-Three Stage

###

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

###

(n1=1400r/min 50hz)
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.1kw	output shaft		Ø18								Ø22
	n2* (r/min)		282	138	92	70	56	46	35	28	23	18	14	–	11	9	7
	M2(Nm)	50hz	3.2	6.5	9.8	12.9	16.1	19.6	25.7	31.1	37.5	49.5	62.9	–	76.1	100.7	125.4
	M2(Nm)	60hz	3	5	8	11	13	17	21	26	31	41	52	–	63	84	105
	Fr1(N)		588	882	980	1180	1270	1370	1470	1570	2160	2450	2450	2450	2450	2450	2450
	Fr2(N)		176
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.2kw	output shaft		Ø18					Ø22						Ø28
	n2* (r/min)		282	138	92	70	56	45	35	29	23	18	14	13	12	8	7
	M2(Nm)	50hz	6.5	12.6	19.1	26.3	32.6	38.9	50.4	63	75.6	100.8	103.9	125.4	150	200.4	250.7
	M2(Nm)	60hz	5.4	10.5	16.6	21.9	27.1	32.4	42	52.5	63	84	86.6	104.5	125	167	208.9
	Fr1(N)		588	882	980	1180	1270	1760	1860	1960	2160	2450	2450	2840	3330	3430	3430
	Fr2(N)		196
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.4kw	output shaft		Ø22					Ø28						Ø32
	n2* (r/min)		288	144	92	72	58	47	36	29	24	18	14	14	12	9	7
	M2(Nm)	50hz	12.9	25	38.6	51.4	65.4	78.2	100.7	125.4	150	200.4	206.8	250.7	301.1	400.7	461.8
	M2(Nm)	60hz	10.7	20.8	32.1	42.9	54.5	65.2	83.9	104.5	125	167	172.3	208.9	250.9	333.9	384.8
	Fr1(N)		882	1180	1370	1470	1670	2550	2840	3140	3430	3430	3430	4900	5880	5880	5880
	Fr2(N)		245
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
0.75kw	output shaft		Ø28					Ø32						Ø40
	n2* (r/min)		278	140	94	69	58	46	35	29	24	18	14	14	11	9	7
	M2(Nm)	50hz	24.6	48.2	72.9	97.5	122.1	145.7	187.5	235.7	282.9	376.1	387.9	439	527	703	764
	M2(Nm)	60hz	20.5	40.2	60.7	81.3	201.8	121.4	156.3	196.4	235.7	313.4	323.2	366	439	585	732
	Fr1(N)		1270	1760	2160	2350	2450	4020	4210	4610	5490	5880	5880	7060	7060	7060	7060
	Fr2(N)		294
norminal ratio			5	10	15	20	25	30	40	50	60	80	100	100	120	160	200
1.5kw	output shaft		Ø32					Ø40						Ø50
	n2* (r/min)		280	140	93	70	55	47	34	27	24	17	14	13	12	8	7
	M2(Nm)	50hz	48.2	97.5	145.7	193.9	242.1	272	351	439	527	703	724	878	1060	1230	1230
	M2(Nm)	60hz	40.2	81.3	121.4	161.6	201.8	226	293	366	439	585	603	732	878	1170	1230
	Fr1(N)		1760	2450	2840	3230	3820	5100	5880	7060	7060	7060	7060	9800	9800	9800	9800
	Fr2(N)		343
norminal ratio			5	10	15	20	25	30	40	50	60	80	100
2.2kw	output shaft		Ø40					Ø50
	n2* (r/min)		272	136	95	68	54	45	36	28	24	18	14
	M2(Nm)	50hz	67	133	200	266	332	399	515	644	773	1029	1230
	M2(Nm)	60hz	56	111	167	221	277	332	429	537	644	858	1080
	Fr1(N)		2160	3140	3530	4020	4700	6960	7250	8620	9800	9800	9800
	Fr2(N)		392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE (n1=1400r/min)
Power kw	output shaft	ratio	A		F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	F	I	J	M	O	O1	P	Q	R	S	T	U	W	X	Y	Y1
0.1kw	Ø18	5-10-15-20-25-30-40-50	236	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	157	80	81
0.1kw	Ø22	60-80-100-120-160-200	262	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
0.2kw	Ø18	5-10-15-20-25	267	270	192.5	11	16.5	170	4	10	30	145	35	18	20.5	129	6	161	80	81
	Ø22	30-40-50-60-80-100	293	296	197.5	11	19	185	4	12	40	148	47	22	24.5	129	6	171.5	89.5	83.5
	Ø28	100-120-160-200	306	309.5	208.5	11	23.5	215	4	15	45	170	50	28	31	129	8	198.5	105.5	88
0.4kw	Ø22	5-10-15-20-25	314	324.5	204	11	19	185	4	12	40	148	47	22	24.5	139	6	171.5	89.5	88.5
	Ø28	30-40-50-60-80-100	330	337.5	215	11	23.5	215	4	15	45	170	50	28	31	139	8	198.5	105.5	93
	Ø32	100-120-160-200	349	357	229.5	13	28.5	250	4	15	55	180	60	32	35	139	10	234	126	98
0.75kw	Ø28	5-10-15-20-25	350.5	343.5	227.5	11	23.5	215	4	15	45	170	50	28	31	159	8	198.5	105.5	103
	Ø32	30-40-50-60-80-100	379.5	387	242	13	28.5	250	4	15	55	180	60	32	35	159	10	234	126	108
	Ø40	100-120-160-200	401.5	408.5	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
1.5kw	Ø32	5-10-15-20-25	420.5	441	254	13	28.5	250	5	15	55	180	60	32	35	185	10	234	126	121
	Ø40	30-40-50-60-80-100	457.5	478	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
	Ø50	100-120-160-200	485.5	506	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5
2.2kw	Ø40	5-10-15-20-25	466.5	487	270	18	34	310	5	18	65	230	71	40	43	185	12	284	149	126.5
2.2kw	Ø50	30-40-50-60-80-100	510.5	531	300	22	40	360	5	25	75	270	83	50	53.5	185	14	325	173.5	132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT (n1=1400r/min)
Power kw	output shaft	ratio	A		D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
Power kw	output shaft	ratio	standard	brake	D	E	F	J	G	H	K	P	S	T	U	V	W	X	Y	Y1
0.1kw	Ø18	5-10-15-20-25-30-40-50	236	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
0.1kw	Ø22	60-80-100-120-160-200	262	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
0.2kw	Ø18	5-10-15-20-25	267	270	40	110	135	16.5	65	9	45	30	18	20.5	129	183	6	133	85	10
	Ø22	30-40-50-60-80-100	293	296	65	130	155	19	90	11	55	40	22	24.5	129	193	6	139.5	90	12
	Ø28	100-120-160-200	306	309.5	90	140	175	23.5	125	11	65	45	28	31	129	203	8	170	110	15
0.4kw	Ø22	5-10-15-20-25	314	324.5	65	130	155	19	90	11	55	40	22	24.5	139	199.5	6	141.5	90	12
	Ø28	30-40-50-60-80-100	330	337.5	90	140	175	23.5	125	11	65	45	28	31	139	210	8	170	110	15
	Ø32	100-120-160-200	349	357	130	170	208	28.5	170	13	70	55	32	35	139	226	10	198	130	18
0.75kw	Ø28	5-10-15-20-25	350.5	343.5	90	140	175	23.5	125	11	65	45	28	31	159	222	8	170	110	15
	Ø32	30-40-50-60-80-100	379.5	387	130	170	208	28.5	170	13	70	55	32	35	159	238.5	10	198	130	18
	Ø40	100-120-160-200	401.5	408.5	150	210	254	34	196	15	90	65	40	43	185	249	12	230	150	20
1.5kw	Ø32	5-10-15-20-25	420.5	441	130	170	208	28.5	170	13	70	55	32	35	185	250.5	10	198	130	18
	Ø40	30-40-50-60-80-100	457.5	478	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
	Ø50	100-120-160-200	485.5	506	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25
2.2kw	Ø40	5-10-15-20-25	466.5	487	150	210	254	34	196	15	90	65	40	43	185	260	12	230	150	20
2.2kw	Ø50	30-40-50-60-80-100	510.5	531	160	230	290	40	210	18	100	75	50	53.5	185	288	14	265	170	25

Choosing the Right Agricultural Gearbox

There are a number of different types of agricultural gearboxes available. Some are Bevel, while others are Shaft-mounted, bearing-mounted, or CZPT gearboxes. To learn more about these different types, read on. We’ll explain how each works and what to look for in an agricultural gearbox. Alternatively, you can search for information on each type on the web. Agricultural gearboxes can be a great option for your next project.
agriculturalparts

Bevel gearboxes

Bevel gearboxes are a type of mechanical transmission system that uses enclosed spiral and straight bevel-gears to transmit rotational power. They are typically mounted on a right-angle shaft and have a wide range of horsepower and ratios. Some bevel gearboxes are designed to be installed at varying angles. For example, CZPT Gearbox provides bevel gear drives for portable grain augers, elevators, and carts.
Bevel gearboxes are the most common type of gearbox. They have a single-stage design and the beveled edges of two gears interlock to transfer torque and rotation. Bevel gearboxes have multiple advantages over other types of gearboxes. They are also more cost-effective, run quietly, and produce less transmittable torque. They are designed to be used in low-torque applications.
A right-angle gearbox is used for a variety of agricultural applications. It is well-suited for use with offset rotary fillers and hollow output shafts. It has a reduction ratio of 2.44:1. The gearbox is built with a cast-iron case and can produce power rates up to 49kW. These bevel gearboxes are used in small agricultural work, including crop treatment, soil preparation, and cement mixers.
Spiral and straight bevel gears have two major benefits. The first is more durable, while the latter is quieter. Both types have their advantages and disadvantages. Bevel gears can be noisy, so they may not be the best choice for your equipment. But the latter has many benefits. The Spiral bevel gear has a high degree of total coverage, but it costs more to produce.

Shaft-mounted

Shaft-mounted agricultural gearboxes are designed for conveyer systems. These devices have interchangeable mounting dimensions with CZPT and CZPT gearboxes. Agricultural gearboxes are critical to the entire food chain. Worn gears can cause significant loss to farmers. As a result, it is essential to purchase high-quality gearboxes for your farm equipment. The following are some tips to choose the right gearbox for your needs.
Agricultural tractors include an internal combustion engine 10 and a speed change gearbox. The engine’s cylinder block is mounted on the gearbox casing. The gearbox casing extends under the driver’s position and has an elongated shape in the longitudinal direction. The gearbox casing is connected to the rear axle casing 15 by a connecting shaft. The shafts are designed to engage and disengage in opposite directions.
The mounting position of the gearbox is an important consideration. Some applications require no foundation for the gear drive. Generally, a shaft-mounted agricultural gearbox can be attached to the drive equipment via a low-speed shaft. In addition, the shaft is secured around a solid shaft. Rigid flange couplings may be used to connect the gear drive and driven equipment. This type of mounting is preferred for applications where there is no foundation.
Shaft-mounted agricultural gearboxes are designed to optimize machine performance. CZPT Gearbox Company is an innovative company that manufactures top-quality gear drives for a variety of agricultural machinery. They can reverse engineer existing designs or create custom gearboxes for your farm machinery. These agricultural gearboxes are designed to help farmers optimize their machines for maximum efficiency. They transmit power from the input shaft to the output shafts and facilitate change of speed, direction, and rotation.
agriculturalparts

Shaft-mounted with bearings

If you are looking to buy an agricultural gearbox, it will be beneficial to look at the different types of shaft-mounted gearboxes available. Shaft-mounted gearboxes are often made of steel, and are commonly constructed with AGMA class 12 gearing. They typically utilize tapered roller bearings on all shafts, and have a patented triple seal system that prevents dirt and moisture from getting inside. Additionally, they are easy to install and remove, as they don’t require any tools. Finally, they are built to last with minimal maintenance, and will provide maximum uptime.
Shaft-mounted agricultural gearboxes are generally made of steel, and are available in both cylindrical and square shapes. Some types of shafts are able to rotate axially within the bearing while maintaining radial load carrying capabilities. Despite the differences in the shapes of these shafts, they offer high levels of efficiency and performance. For example, the Float-A-Shaft(r) 3 to 2 right-angle gearbox can accommodate both round and square-base mounting, and is capable of generating up to 1100 in-lbs of torque.
Shaft-mounted agricultural gearboxes are constructed from two types of roller bearings: cylindrical roller bearings and tapered roller bearings. A cylindrical roller bearing has one row of balls that are enclosed within a cage, and it has a single axis. The other two rows of bearings have a single or double-row arrangement. Both of them have high axial rigidity and can handle high axial loads.

CZPT gearboxes

The demand for food has skyrocketed since the turn of the century, and the World Bank estimates that the number of people on the planet will grow by 80 million annually by 2025. As the demand for food grows, agricultural machinery manufacturers are coming up with innovative ways to make the most of their land. This results in shorter cropping cycles and greater wear and tear on farm equipment, including CZPT agricultural gearboxes.
Bevel gearboxes are enclosed straight or spiral gears that transmit rotational power to various parts of agricultural machinery. They are available in a variety of right-angle and spiral configurations. The CZPT Gearbox, for example, features a 68-degree bevel gear drive for augers and grain carts. The company also offers a 50-degree bevel gear drive. These gearboxes are made with the latest technology and incorporate horizontally split housing designs.
Agricultural gearboxes from CZPT are available in a variety of designs, including reversing gears. Reversing gears feature ball bearings that reduce friction and increase efficiency. This gearbox can be purchased in a wide range of power ratings and blade counts, allowing the farmer to choose the one that works best for their needs. This will ensure long-term functionality and effectiveness. So whether you’re a farmer or a manufacturer of agricultural equipment, a CZPT agricultural gearbox will work for you.

Bevel gearboxes with bearings

The bevel gearing is a popular choice for agricultural gearboxes due to its high load capacity. The bevel gearing is widely used in mechanical transmission systems, including agricultural tractors. For modern harvesters, high-performance gearboxes are necessary for smooth operation. Leading agricultural equipment manufacturers rely on CZPT Gearbox Company to provide these high-quality and durable drive systems. This is why we supply bevel gearboxes for agricultural machinery.
A bevel gearbox can be either straight or helical. The latter option is the simplest type and tends to be cheaper to produce. However, it is difficult to realize small profile coverage with straight gearwheels. Furthermore, it is less efficient in transmitting torque. The bevel gearbox can be used for both clockwise and counterclockwise rotation. It is available with a standard mount and aluminum casing.
Depending on the type of agriculture machinery, bevel gearboxes with bearings are suitable for many tasks. Their versatility allows them to be used in a variety of mechanical applications. The double gear allows the upper bevel gear angular gear 2 to pivot relative to the lower bevel gear angular gear 3.
Besides bearings, other factors influence the performance of agricultural gearboxes. Insufficient data may make it difficult to obtain the exact gear. For this reason, a broken gear requires a detailed manufacturing drawing. This drawing requires expertise in technical gear, as well as specialized engineering manpower. It also increases the cost of production. The gears are subjected to heat treatment before being shipped to the customer.
agriculturalparts

Bevel gearboxes with CZPT gearboxes

The demand for agricultural products has increased dramatically since 2010. The world population is increasing at a rapid pace (80 million people per year until 2025), but land is not. Farmers are looking for ways to maximize their land’s potential to grow more food. This increased demand for agricultural machinery is driving the need for highly efficient gearboxes. With replacement parts easily available, manufacturers can meet the growing demand for agricultural equipment.
China Flange Mounting Foot Mounting High Torque Helical Geared Motor Reduction Gearbox with Good quality
editor by czh 2022-12-06