Mô tả
Mô tả sản phẩm
Starshine Travel Cycloid Geared Motor Đặc trưng
1. Đặc điểm:
1. JCPT working,minimal noise equipment tooth needle a lot more engagement.
2. Cycloidal tooth profile supplies a large get in touch with ratio to stand up to overload shocks
3. Compact dimension: solitary ratio accessible from 1/9 to 1/87, double phase up from 1/ninety nine to one/7569
four. Excellent for dynamic applications: frequent start-quit-reversing obligations fits for cyclo pace reducer considering that inertia is reduced
five. Minimize maintenance costs: high reliability, extended lifestyle, nominal maintenance in contrast to traditional gearboxes
6. Inside elements replaceable with other brand names to guarantee managing.
7. Grease Lubricated & Oil Lubricated Versions Accessible
8. Output Shaft Rotation Path: Solitary Reduction: Clockwise Rotation Double Reduction→ Counter Clockwise Rotation
nine. Ambient Circumstances: Indoor Installation:ten-forty Celsius, Max eighty five% Humidity, Below 1000m Altitude, Properly Ventilated Surroundings, Cost-free of corrosive, explosive gases, vapors and dust
10.Sluggish Pace Shaft Path: Horizontal, Vertical Up & Down, Universal Direction
eleven.Mounting Type: Foot Mount, Flange Mount & Vertical F-flange Mount,
twelve. Input Relationship: Cyclo Integral Motor, Hollow Input Shaft Adapter
thirteen. Coupling Technique With Pushed Equipment: Coupling, Gears, Chain Sprocket Or Belt
14. Cycloid reducer Capacity Variety: .37kW ~ 11kW
2. Complex tham sốS
| Kind | Outdated Type | Mô-men xoắn đầu ra | Output Shaft Dia. |
| SXJ00 | JXJ00 | 98N.m | φ30 |
| SXJ01 | JXJ01 | 221N.m | φ35 |
| SXJ02 | JXJ02 | 448N.m | φ45 |
| SXJ03 | JXJ03 | 986N.m | φ55 |
| SXJ04 | JXJ04 | 1504N.m | φ70 |
| SXJ05 | JXJ05 | 3051N.m | φ90 |
| SXJ06 | JXJ06 | 5608N.m | φ100 |
Về chúng tôi
ZheJiang Starshine Drive Co.,Ltd,the predecessor was a state-owned army mould enterprise, was established in 1965. Starshine specializes in the complete electricity transmission remedy for large-end products producing industries primarily based on the aim of “Platform Item, Application Style and Expert Provider”.
Starshine have a sturdy specialized force with over 350 staff at present, including above thirty engineering experts, 30 good quality inspectors, covering an region of 80000 square meters and varieties of sophisticated processing devices and testing equipments. We have a very good foundation for the industry software advancement and services of high-finish pace reducers & variators proudly owning to the provincial engineering technological innovation research centre,the lab of equipment velocity reducers, and the foundation of modern R&D.
Our Group
High quality Handle
High quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,JCPTer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Chính sách chất lượng: nhằm nâng cao trình độ tổng thể trong lĩnh vực truyền tải điện.
Quan điểm về chất lượng: Cải tiến liên tục, theo đuổi sự xuất sắc.
Triết lý chất lượng: Chất lượng tạo ra giá trị
three. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection responsible for tracking bad, to monitor the supplier to take corrective
các biện pháp để ngăn ngừa tái phát.
4. Kiểm soát chất lượng quy trình
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend
Phát hiện hiện tượng bất thường trong quá trình sản xuất và giám sát bộ phận sản xuất để cải thiện, loại bỏ hiện tượng hoặc tình trạng bất thường đó.
five. FQC(Final QC)
After the manufacturing department will complete the product, stand in the JCPTer’s position on the finished product quality verification, in order to ensure the quality of
JCPTer expectations and needs.
six. OQC(Outgoing QC)
Sau khi kiểm tra mẫu sản phẩm để xác định sản phẩm đạt tiêu chuẩn, cho phép lưu kho, nhưng khi sản phẩm hoàn thiện rời khỏi kho trước khi giao hàng chính thức, sẽ có một bước kiểm tra, gọi là kiểm tra trước khi giao hàng. Nội dung kiểm tra: Xác nhận tình trạng lưu kho và chuyển giao trong kho, đồng thời xác nhận việc giao hàng.
merchandise is a product inspection to determine the qualified products.
7. Chứng nhận.
Đóng gói
Vận chuyển
