Сипаттама
Шешімнің сипаттамасы
ZD 090mm ZB Series IP65 Safety Quality High JCPT and Little Backlash Planetary Gearbox
Өнім сипаттамасы
The higher-precision planetary gearbox adopts helical equipment style, and is utilized in a variety of handle transmission fields with servo motors, this sort of as precision equipment instruments, laser slicing tools, battery processing equipment, and many others. It has the rewards of input and output built-in construction, large torque and large precision. The backlash of the ZB collection is less than three arc.min and the reduction ratio covers 3~a hundred.
Пөнім Aартықшылықтары Планетарлық Беріліс қорабы:
one.Adaptable construction layout, in line with various working circumstances.
two.Ring equipment processing technologies: Using interior equipment slotting machine and hobbing machine the precision of ring gear following processing can achieve GB7.
3.Hardened gear secondary scraping technology: secondary high-pace dry cutting of gear removes equipment deformation induced by warmth treatment. Gear precision can achieve GB6.
four.JCPT backlash testing.
Қалай оқу керек:
090 ZB twenty ( ) (S1) -750 T1
a b c d e f g
| а | Body Measurement | 090=90mm |
| б | Collection code:ZB | Sq. mounting flange sequence |
| с | Азайту коэффициенті | Solitary Phase: three,4,5,6,7,8,nine,ten Two Phases:fifteen,20,25,thirty,35,40,45,50,60,70,80,90,a hundred |
| d | Кері соққы | Solitary Stage: 3arc.min 5arc.min Two Levels: 5arc.min 7arc.min |
| e | Input shaft kind | S1: Locking with locking ring (No matter no matter whether the motor with keyway can use it.) S2: Locking with keyway (Enter shaft with crucial) A: Other sorts (You should contact with us) |
| f | Relevant servo motor power (W),Remember to speak to us for particular power | |
| г | Please make contact with us for the mouting sort of the flang | |
Spesifications & Particulars
| Item Sort | Device | Amount Of Stage | Азайту коэффициенті | 090ZB | 090(A)ZB |
| Номиналды шығыс моменті | Нью-Мексико | бір | 3 | жүз отыз | / |
| 4 | 140 | / | |||
| 5 | 160 | / | |||
| алты | жүз елу | / | |||
| 7 | жүз қырық | / | |||
| сегіз | 120 | / | |||
| 9 | жүз | / | |||
| 10 | 100 | / | |||
| 2 | 15 | 130 | жүз отыз | ||
| жиырма | 140 | жүз қырық | |||
| 25 | жүз алпыс | жүз алпыс | |||
| отыз | жүз елу | 150 | |||
| 35 | 140 | 140 | |||
| 40 | 120 | жүз жиырма | |||
| 45 | жүз | жүз | |||
| елу | жүз алпыс | жүз алпыс | |||
| 60 | жүз елу | 150 | |||
| 70 | жүз қырық | жүз қырық | |||
| сексен | 120 | 120 | |||
| тоқсан | жүз | жүз | |||
| жүз | 100 | жүз | |||
| Allowable radial force | N | бір, 2 | 3~a hundred | 3250 | 3250 |
| Allowable axial drive | 1, екі | 3~100 | 1625 | 1625 | |
| Complete Load Efficiency | % | бір | 3~10 | ≥97% | ≥97% |
| екі | 15~a hundred | ≥94% | ≥94% | ||
| Кері соққы | доғалық мин | 1 | 3~10 | ≤3 | / |
| екі | 15~one hundred | ≤5 | ≤5 |
Dimensions(Single-stage, Reduction Ratio i=three~ten, Device: mm):
| Product sort | D1 | D2 | D3h6 | D4g6 | D5 | D6 | L1 | L2 | L3 | L4 | L5 | L6 | L7 |
| 090ZB | жүз | six.six | 22 | 80 | M8X1.25P | 116 | тоқсан | forty eight | он | 35.5 | 32 | 2 | 8 |
| L8 | L9 | C1 | C2 | C3 | C4 | C5G6 | C6 | C7 | C8 | C9 | B1h9 | H1 | |
| 78 | 19 | жүз | M6X1P | ≤19/≤24 | 40.5 | 80 | төрт | 90 | seventeen.five | 143.five | алты | 24.five |
Dimensions(Two-phase, Reduction Ratio i=15~one hundred, Unit: mm):
| Item kind | D1 | D2 | D3h6 | D4g6 | D5 | D6 | L1 | L2 | L3 | L4 | L5 | L6 | L7 |
| 090ZB | жүз | six.six | 22 | сексен | M8X1.25P | 116 | 90 | 48 | он | 36 | 32 | 3 | 8 |
| L8 | L9 | C1 | C2 | C3 | C4 | C5G6 | C6 | C7 | C8 | C9 | B1h9 | H1 | |
| 116 | 19 | 70 | M5X0.8P | ≤14/≤15.875/≤16 | 35 | 50 | 8 | 60 | 19.five | 183.five | 6 | 24.5 |
| Өнім түрі | D1 | D2 | D3h6 | D4g6 | D5 | D6 | L1 | L2 | L3 | L4 | L5 | L6 | L7 |
| 090AZB | жүз | six.six | 22 | 80 | M8X1.25P | 116 | 90 | forty eight | 10 | 36 | 32 | 3 | сегіз |
| L8 | L9 | C1 | C2 | C3 | C4 | C5G6 | C6 | C7 | C8 | C9 | B1h9 | H1 | |
| 126 | 19 | жүз | M6X1P | ≤19/≤24 | 40.5 | сексен | 4 | тоқсан | seventeen.five | 191.5 | 6 | 24.5 |
System
Double assistance system
1.The planetary gear is put in the middle of the output shaft.
two.The output shaft bearing is put at equally finishes of the planetary gear.
3.The input shaft is put inside of the output shaft.
four.built-in coupling solar gear.
Шығару білігінің ықшам механизмі
It adopts the layout of output shaft integrated program, compact structure, substantial rigidity, and it can withstand big effect. Place the input coupling and the sun gear at the middle of the output shaft to improve the concentricity of the factors, thereby successfully managing the equipment clearance and enhancing the backlash of the whole gearbox.
Құрылым
Total needle construction
The interior bearing of the planetary equipment adopts a total-needle style, the internal gap is created by a grinding approach, the surface area hardness is HRC60, and the cylindricity is considerably less than .003mm.
Ring gear construction
The integral composition of the ring equipment and the output flange increases its rigidity and minimizes misassembly.
JCPT Software Case
The photo displays the software of ZB collection planetary gearboxes in Panel saw
In addition, ZB sequence planetary gearboxes are also broadly employed in CNC pipe bending equipment, rotary printing, Die cutting, CNC spring grinding equipment, abrasive finishing equipment and other industries.
More products,you should click on here…
Бизнес профилі
Жеткізілім
Our Solutions
one.Upkeep time & Кепілдік: Зауыттан шыққаннан кейін 1 жыл.
two.Other provider: Which includes modeling variety guidebook, installation information, and problem shooting manual, and many others.
Жиі қойылатын сұрақтар
С: Сіздің негізгі өнімдеріңіз қандай?
A: We at present produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Higher JCPT Planetary Gearbox and JCPT Cycloidal Gearbox and so on.. You can examine the specifications for above motors on our website and you can email us to suggest essential motors for each your specification also.
Q: How to decide on a suitable motor or gearbox?
A:If you have motor images or drawings to present us, or you have detailed specs, this sort of as, voltage, pace, torque, motor dimension, doing work method of the motor, necessary lifetime and sound amount and so forth, please do not be reluctant to allow us know, then we can advise appropriate motor per your request appropriately.
Q: Do you have a JCPTized provider for your regular motors or gearboxes?
A: Sure, we can JCPTize per your ask for for the voltage, pace, torque and shaft size/form. If you want further wires/cables soldered on the terminal or need to insert connectors, or capacitors or EMC we can make it too.
Q: Do you have an personal design and style services for motors?
A: Sure, we would like to design and style motors separately for our JCPTers, but some kind of molds are necessory to be developped which could need to have actual price and layout charging.
Q: What is actually your guide time?
A: Generally talking, our standard standard merchandise will need to have fifteen-30days, a little bit lengthier for JCPTized merchandise. But we are very adaptable on the lead time, it will rely on the particular orders.
