China Professional Spiral Worm Gearbox for Paper Pulp with Hot selling

Product Description

The gearbox  is generally used for low-speed and high-torque transmission equipment. The power of the electric motor, internal combustion engine or other high-speed operation is achieved through the gear of the input shaft of the reducer meshing with the large gear on the output shaft. The ratio of the number of teeth is the transmission ratio.There 4 type gearbox for paper mill,pls check the follow informations:

Worm/spiral bevel gearbox reducer

1. Worm/spiral bevel gear reducer is manufactured in accordance with international technical requirements and has a high technological content.
2. It saves space, is reliable and durable, with high overload capacity, and the power can reach more than 200KW.
3. Low energy consumption, superior performance, and the reducer efficiency is as high as 95%.
4. K spiral bevel gear reducer has low vibration, low noise and high energy saving.
5. The spiral bevel gear reducer is made of high-quality steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated.

6. After precision processing, the reducer that forms the transmission assembly of helical gears, bevel gears and bevel gears is equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the geared motor products.

2. Performance characteristics:
1. Vertical output, compact structure, hard tooth surface transmission torque, high-precision gears ensure stable work, low noise and long life.
2. Installation method: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
3. Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
4. Output mode: hollow shaft output or solid shaft output, the average efficiency is 94%.
5. Combine with R series to get larger speed ratio.

3. Technical parameters:

Speed ratio range: basic type 5.36~197.37, K/R combination type can reach 32625
Torque range: 200~50000 Nm
Power range: 0.18~200 kW

Helical gear hardened gear reducer

1. R series helical gear hardened gear reducer is manufactured in accordance with international technical requirements and has a high technological content;
2. Hard tooth surface reducer saves space, is reliable and durable, has high overload capacity, and the power can reach 132KW;
3. Low energy consumption, superior performance, and the reducer efficiency is as high as 95% or more;
4. Low vibration, low noise and high energy saving;
5. The helical gear reducer is made of high-quality forged steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated;
6. After precision machining to ensure shaft parallelism and positioning bearing requirements, the reducer forming the helical gear transmission assembly is equipped with various types of motors, combined into mechatronics, which fully guarantees the quality characteristics of the geared motor products.

2.Features:
1. Small offset output, compact structure, maximum use of cabinet space, the second and third levels are in the same cabinet.
2. It adopts integral casting box, which has good structural rigidity, which is easy to improve the strength of the shaft and the life of the bearing.
3. Installation method: foot installation, flange installation with large and small flanges, easy to choose.
4. With solid shaft output, the average efficiency is 96% for the second stage, 94% for the third stage, and 85% for the R/R combination.
5. The RM series specially designed for mixing can bear larger axial and radial forces.

3. Technical parameters:

Speed ratio range: R basic type 3.33~289.74, RX type 1.3~8.65, R/R combined type can reach 27001
Torque range: R basic type 85~18000 Nm, RX type 20~1680 Nm
Power range: R basic type 0.18~160 kW, RX type 0.18~132 kW

 

Parallel shaft helical gear reducer

1. The F series parallel shaft helical gear reducer is manufactured in accordance with international technical requirements and has a high technological content.
2. It saves space, is reliable and durable, has high overload capacity, and the power can reach more than 90KW.

3. F parallel shaft helical gear reducer has low energy consumption, superior performance and efficiency as high as 95%.
4. Parallel shaft helical gear reducer has low vibration, low noise and high energy saving. It is made of high-quality steel material, rigid cast iron box, and the surface of the gear is high-frequency heat treated.
5. After precision machining, the shaft parallelism and positioning accuracy are ensured. All of this constitutes the gear transmission assembly. The reducer is equipped with various motors, forming a mechatronics, which fully guarantees the quality characteristics of the geared motor products.
 
2.Features:
1. Parallel output, compact structure, large transmission torque, stable operation, low noise and long life.
2. Installation method: base installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
3. The rotation direction of the input and output of the basic two-stage is the same, and the three-stage is opposite; another consultation is needed for F/R combination.
4. Output mode: hollow shaft output or solid shaft output.
5. Average efficiency: 96% for level two, 94% for level three, and 85% for F/R combination.

 3. Technical parameters:

Speed ratio range: basic type 3.81~281.71, F/R combination type can reach 31434
Torque range: 200~18000 Nm
Power range: 0.18~200 kW

Helical gear worm gear reducer

  1. The S series helical gear worm reducer has a high technological content. It has a combination of helical gear and worm gear for integrated transmission, which improves the torque and efficiency of the machine. This series of products have complete specifications, wide speed range, good versatility, adapt to various installation methods, safe and reliable performance and long life, and have implemented international standards.
  2. The surface of the body has a heat dissipation effect, strong vibration absorption, low temperature rise and low noise.
  3. The machine has good sealing performance and strong adaptability to the working environment.
  4. The helical gear worm gear reducer has high transmission accuracy, which is especially suitable for working in occasions with frequent starting. It can be connected to various reducers and equipped with various types of motor drives. It can be installed in a 90 degree transmission operation.
position.
  5. The key components of the S helical gear reducer are made of highly wear-resistant materials and have undergone special heat treatment. They have the characteristics of high machining accuracy, stable transmission, small size, large carrying capacity, and long life.
  6. The helical gear reducer can be equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the product.
 
2.Features:
  1. Combination of helical gear and worm gear, compact structure and large reduction ratio.
  2. Installation method: foot installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
  3. Input mode: motor direct connection, motor belt connection or input shaft, connection flange input.
  4. Average efficiency: reduction ratio of 7.5-69.39 is 77%; 70.43-288 is 62%; S/R combination is 57%.
  5. Combine with R series to get larger speed ratio.
 

 3. Technical parameters:

Speed ratio range: basic type 9.96~244.74, S/R combination type can reach 8608
Torque range: 43~4200 Nm
Power range: 0.18~22 kW

Packing 

Contact us to have more details about “Gearbox “

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are 3 of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and 2 planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of 3 different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than 1 stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the 1 speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include 2 parts.
Generally, a one-speed gearbox will have up to 7 forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have 5 different gear sets and 5 different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Professional Spiral Worm Gearbox for Paper Pulp     with Hot sellingChina Professional Spiral Worm Gearbox for Paper Pulp     with Hot selling