Applicable Industries: Building Material Shops
Showroom Location: Egypt
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product 2571
Warranty of core components: 5 years
Core Components: PLC
Motor Type: AC Motor
Warranty: More than 5 years
Spare parts: speed reducer
Keywords: Centrifugal Gold Concentrtor
Usage: Mining Concentration
Feeding size: Requiremend
Local Service Location: Egypt
The gold-rolling machine has the advantages of small investment, high output, quick effect and low production cost. It is an ideal equipment for mineral processing in small and medium-sized enterprises. The size of the crusher is coded by the diameter of the mill. 1600 type 1500 type 1400 type 1350 type, 1300 type rolling machine can be used for iron, molybdenum, lead, zinc, antimony and other minerals. 1200, 1100, 1000, 900, 850 are available for users to choose from. The design of the gold-plating machine has been greatly improved compared with the traditional machine. The traditional machine has large installation period, short service life, large motor power, and the manufacturer does not have the motor and starting equipment, so the installation period is long, the user can not Immediately put into production, the materials used for racks and basins are small and thin, and users are prone to problems during use. Large-scale lifting equipment is required to maintain replacement materials, which increases the production cost for users. The crusher is mainly used for grinding and rolling. The material consisting of working parts is broken (powdered) or kneaded.
Milling machine useThe gold crusher is mainly used for gold, silver, lead, zinc, iron, molybdenum, copper, tantalum and other mines. All ball mills can be selected for mining and wet milling machines. Through the stirring, rolling, crushing and rolling of the raw materials, the water balance is balanced, the ratio is uniform, the gas content is low, the molding rate and the molding quality are improved, and the product formed by the machine is high in density. Good strength, no stomatal proportion and so on. Efficient and energy-saving, high output, this product is used for the recovery of tailings in the iron ore process, without the loss of mineral powder, so that effective resources can be fully utilized. The products are highly praised by new and old customers. They have passed the inspection of the national mining machinery quality in the past years.
Rolling machine featuresThe rolling mill is mainly formed by mixing, rolling, crushing and rolling the raw materials to achieve water balance, uniform ratio, low gas content, improved molding rate and molding quality, and products formed by the machine. It has the characteristics of high density, good strength and no stomatal proportion. Highly efficient and energy-saving, high output, this product is used for the recovery of tailings in the iron ore process, does not make the mineral powder lost, 280mm Planetary Gear Motor Servo Planetary Gearbox Hollow Rotating Platform so that the effective resources can be fully utilized, with strong technical force, perfect testing system, strict Quality management, advanced production equipment. We have been constantly developing new product development strategies, adhering to the market-oriented, taking products as the leader and capital as the link. Continue to expand to a high starting point, large-scale, and outward-oriented. Strictly abide by the principle of equality, mutual benefit, and customer first. In good faith and pragmatic, we sincerely welcome customers from all over the world to visit us, seek common development and create brilliance together.
machine 1300 type A
Y6 level 15kw
rolling machine 1300B
Y4 level 15kw
rolling machine 1200 type A
Y6 level 7.5kw
Y4 grade 7.5kw
gold1100 type A
Y6 grade 7.5kw
Y4 grade 7.5kw
Y4 grade 5.5kw
Y4 grade 5.5kw
Located at No.6 Cuizhu Street,Hi-Tech Zone,HangZhou city,China, Winnermac Heavy Industry inc is a technology-intensive enterprise, which integrates development, production and sales of mining and agricultural machinery over more than 20 years. And we developed through innovation, and put into production officially in 1993.In Winnermac, we offer Integrated technology solutions with superior quality machines, which are at the cutting edge of the global mining and agricultural machinery landscape.Supported by decades of experience and in partnership with worldwide Toprank mineral processing and fertilizer production companies, Winnermac today is the leading machinery manufacutrer and solution provider.
The leading products include whole set mineral processing equipment and Fertilizer Production Machines.
the Mineral Processing Equipments are Magnetic Separator, Rotary Dryer,Ball Mill, High precision ratio gearbox planetary gearbox transmission round servo gear reducer Shaking Table, flotation machine, Spiral Classifier,Jigger, etc. and those machines are applicable to select non-ferrous metal ore such as iron, copper, gold, silver, lead, tungsten, molybdenum, manganese and non-metal ores such as fluorite and quartz. Our Fertilizer Production Machines are composed of disc mixers, vertical crusher, disc granulator, rotary drum granulator, rotary dryer, rotary cooler, belt conveyor, elevator, packaging machines, high-temperature materials drying equipment and fertilizer coating machine. and Fertilizer machine is applicable to produce Organice and Inorganic fertilizer with high, medium and low content of fertilizers.
With 20 years of growth and development, we now have fixed assets amounting to RMB103,260,000, 400 staffs and 80 technicians. We cover an area of 80,000 square meters,with a workshop area of 50,000 square meter. We have became a comprehensive enterprise that comprises scientific research, test, manufacture, and service departments. The products have won many awards of varied levels and passed the attestation of ISO9001 Quality Control System SGS of Sweden. Our clients spread all over the country. Products are sold to South Korea, ZheJiang , Indonesia, Vietnam, Portugal, Germany and Middle East with the Annual export quantum composing 1 third of the total sales, wining praises from the purchasers. Sincerely welcome the friends from all over the world to our company for investigation and order. As a result of our continous efforts, our company has become 1 of the largest manufacturer and supplier of electromechanical equipments in similar industry of China. And we have a large variety of equipment with various specification, and our automation degree is very high.
QUALITY,COST CONTROLIn order to provide high-quality products and best service for our customers, we always insist on doing the following things: 1,Based on the national standards and requirements of production process, we have made our own quality stardards and also strictly adhere to those standards. All the processes from outsourced parts to the processing by ourselves are controlled by the quality control department. 2,All of our steel materials are purchased from famous Baosteel Group Company and Masteel Group Company in China, and after purchased, those steel materials should be thoroughly checked by our quality control department before putting into use. In this way, high quality of our products is guaranteed from the very beginning. 3,We have obtained certificates of ISO9001, Direct Wholesale Steel Shaft Drive Bicycle Spline Bearing For Workshop ISO2000 and ABS. And in our production process, we strictly adhere to the ISO9001 quality management standards and carefully allocated physical recources and labor power to optimize the utilization of our resources
How to Select a Gearbox
When you drive your vehicle, the gearbox provides you with traction and speed. The lower gear provides the most traction, while the higher gear has the most speed. Selecting the right gear for your driving conditions will help you maximize both. The right gearing will vary based on road conditions, load, and speed. Short gearing will accelerate you more quickly, while tall gearing will increase top speed. However, you should understand how to use the gearbox before driving.
The function of the gearbox is to transmit rotational energy to the machine’s drive train. The ratio between input and output torque is the ratio of the torque to the speed of rotation. Gearboxes have many different functions. A gearbox may have multiple functions or one function that is used to drive several other machines. If one gear is not turning, the other will be able to turn the gearbox. This is where the gearbox gets its name.
The pitch-controlled system has an equal number of failure modes as the electrical system, accounting for a large proportion of the longest machine downtime and halt time. The relationship between mechanisms and faults is not easily modeled mathematically. Failure modes of gearboxes are shown in Fig. 3. A gearbox’s true service life is six to eight years. However, a gearbox’s fault detection process must be developed as mature technology is required to reduce the downtime and avoid catastrophic incidents.
A gearbox is a vital piece of machinery. It processes energy produced by an engine to move the machine’s parts. A gearbox’s efficiency depends on how efficiently it transfers energy. The higher the ratio, the more torque is transferred to the wheels. It is a common component of bicycles, cars, and a variety of other devices. Its four major functions include:
In addition to ensuring gearbox reliability, a gearbox’s maintainability should be evaluated in the design phase. Maintainability considerations should be integrated into the gearbox design, such as the type of spare parts available. An appropriate maintenance regime will also determine how often to replace or repair specific parts. A proper maintenance procedure will also ensure that the gearbox is accessible. Whether it is easy to access or difficult to reach, accessibility is essential.
A car’s transmission connects the engine to the wheels, allowing a higher-speed crankshaft to provide leverage. High-torque engines are necessary for the vehicle’s starting, acceleration, and meeting road resistance. The gearbox reduces the engine’s speed and provides torque variations at the wheels. The transmission also provides reversing power, making it possible to move the vehicle backwards and forwards.
Gears transmit power from one shaft to another. The size of the gears and number of teeth determine the amount of torque the unit can transmit. A higher gear ratio means more torque, but slower speed. The gearbox’s lever moves the engaging part on the shaft. The lever also slides the gears and synchronizers into place. If the lever slips to the left or right, the engine operates in second gear.
Gearboxes need to be closely monitored to reduce the likelihood of premature failure. Various tests are available to detect defective gear teeth and increase machine reliability. Figure 1.11(a) and (b) show a gearbox with 18 teeth and a 1.5:1 transmission ratio. The input shaft is connected to a sheave and drives a “V” belt. This transmission ratio allows the gearbox to reduce the speed of the motor, while increasing torque and reducing output speed.
When it comes to speed reduction, gear box is the most common method for reducing motor torque. The torque output is directly proportional to the volume of the motor. A small gearbox, for example, can produce as much torque as a large motor with the same output speed. The same holds true for the reverse. There are hybrid drives and in-line gearboxes. Regardless of the type, knowing about the functions of a gearbox will make it easier to choose the right one for your specific application.
When selecting a gearbox, the service factor must be considered. Service factor is the difference between the actual capacity of the gearbox and the value required by the application. Additional requirements for the gearbox may result in premature seal wear or overheating. The service factor should be as low as possible, as it could be the difference between the lifetime of the gearbox and its failure. In some cases, a gearbox’s service factor can be as high as 1.4, which is sufficient for most industrial applications.
China dominates the renewable energy industry, with the largest installed capacity of 1000 gigawatts and more than 2000 terawatt hours of electricity generated each year. The growth in these sectors is expected to increase the demand for gearboxes. For example, in China, wind and hydropower energy production are the major components of wind and solar power plants. The increased installation capacity indicates increased use of gearboxes for these industries. A gearbox that is not suitable for its application will not be functional, which may be detrimental to the production of products in the country.
A gearbox can be mounted in one of four different positions. The first three positions are concentric, parallel, or right angle, and the fourth position is shaft mount. A shaft mount gearbox is typically used in applications where the motor can’t be mounted via a foot. These positions are discussed in more detail below. Choosing the correct gearbox is essential in your business, but remember that a well-designed gearbox will help your bottom line.
The service factor of a gearbox is dependent on the type of load. A high shock load, for example, can cause premature failure of the gear teeth or shaft bearings. In such cases, a higher service factor is required. In other cases, a gearbox that is designed for high shock loads can withstand such loads without deteriorating its performance. Moreover, it will also reduce the cost of maintaining the gearbox over time.
When choosing the material for your gearbox, you must balance the strength, durability, and cost of the design. This article will discuss the different types of materials and their respective applications and power transmission calculations. A variety of alloys are available, each of which offers its own advantages, including improved hardness and wear resistance. The following are some of the common alloys used in gears. The advantage of alloys is their competitive pricing. A gear made from one of these materials is usually stronger than its counterparts.
The carbon content of SPCC prevents the material from hardening like SS. However, thin sheets made from SPCC are often used for gears with lower strength. Because of the low carbon content, SPCC’s surface doesn’t harden as quickly as SS gears do, so soft nitriding is needed to provide hardness. However, if you want a gear that won’t rust, then you should consider SS or FCD.
In addition to cars, gearboxes are also used in the aerospace industry. They are used in space travel and are used in airplane engines. In agriculture, they are used in irrigation, pest and insect control machinery, and plowing machines. They are also used in construction equipment like cranes, bulldozers, and tractors. Gearboxes are also used in the food processing industry, including conveyor systems, kilns, and packaging machinery.
The teeth of the gears in your gearbox are important when it comes to performance. A properly meshing gear will allow the gears to achieve peak performance and withstand torque. Gear teeth are like tiny levers, and effective meshing reduces stress and slippage. A stationary parametric analysis will help you determine the quality of meshing throughout the gearing cycle. This method is often the most accurate way to determine whether your gears are meshing well.
The global gear market is divided into five key regions, namely, North America, Europe, Asia Pacific, and Latin America. Among these regions, Asia Pacific is expected to generate the largest GDP, owing to rapidly growing energy demand and investments in industrial infrastructure. This region is also home to some of the largest manufacturing bases, and its continuous building of new buildings and homes will support the industry’s growth. In terms of application, gearboxes are used in construction, agricultural machinery, and transportation.
The Industrial Gearbox market is anticipated to expand during the next several years, driven by the rapid growth of the construction industry and business advancements. However, there are several challenges that hamper the growth of the industry. These include the high cost of operations and maintenance of gear units. This report covers the market size of industrial gearboxes globally, as well as their manufacturing technologies. It also includes manufacturer data for the period of 2020-2024. The report also features a discussion of market drivers and restraints.
Global health crisis and decreasing seaborne commerce have moderately adverse effects on the industry. Falling seaborne commerce has created a barrier to investment. The value of international crude oil is expected to cross USD 0 by April 2020, putting an end to new assets development and exploitation. In such a scenario, the global gearbox market will face many challenges. However, the opportunities are huge. So, the market for industrial gearboxes is expected to grow by more than 6% by 2020, thanks to the increasing number of light vehicles sold in the country.
The main shaft of a gearbox, also known as the output shaft, spins at different speeds and transfers torque to an automobile. The output shaft is splined so that a coupler and gear can be connected to it. The counter shaft and primary shaft are supported by bearings, which reduce friction in the spinning element. Another important part of a gearbox is the gears, which vary in tooth count. The number of teeth determines how much torque a gear can transfer. In addition, the gears can glide in any position.