China Custom Right Angle Power Transmission Helical Gearbox Like CZPT W and Motovario RV with high quality

Product Description

Product Description

KPM-KPB series helical-hypoid gearboxes are the new-generation product with a compromise of advanced technology both at home and abroad.This product is widely used in textile, foodstuff, beverage,tobacco, logistics industrial fields,etc.
Main Features:
(1) Driven by hypoid gears, which has big ratios.
(2) Large output torque, high efficiency(up to 92%), energy saving and environmental protection.
(3) High quality aluminum alloy housing, light in weight and non-rusting.
(4) Smooth in running and low in noise, and can work long time in dreadful conditions.
(5) Good-looking appearance, durable service life and small volume.
(6) Suitable for all round installation, wide application and easy use.
(7) KPM series can replace NMRV worm gearbox; KPB series can replace CZPT W series worm gearbox;
(8) Modular and multi-structure can meet the demands of various conditions.
 Main Material:
(1) Housing: aluminum alloy 
(2) Gear wheel: 20CrMnTiH1,carbonize & quencher heat treatment make the hardness of gears surface up to 56-62 HRC, retain carburization layers thickness between 0.3 and 0.5mm after precise grinding.

Detailed Photos

Product Parameters

Model Information:

GEARBOX SELECTING TABLES
KPM50..						n1=1400r/min				160Nm
Model		i	i	n2	M2max	Fr2	63B5	71B5/B14	80B5/B14	90B5/B14
		nominal	actual	[r/min]	[Nm]	[N]
3 Stage
KPM50C		300	294.05	4.8	130	4100		N/A	N/A	N/A
KPM50C		250	244.29	5.8	130	4100		N/A	N/A	N/A
KPM50C		200	200.44	7.0	130	4100		N/A	N/A	N/A
KPM50C		150	146.67	9.6	160	4000		N/A	N/A	N/A
KPM50C		125	120.34	12	160	3770			N/A	N/A
KPM50C		100	101.04	14	160	3560			N/A	N/A
KPM50C		75	74.62	19	160	3220			N/A	N/A
KPM50C		60	62.36	23	160	3030			N/A	N/A
KPM50C		50	52.36	27	160	2860			N/A	N/A
2 Stage
KPM50B		60	58.36	24	130	2960			N/A	N/A
KPM50B		50	48.86	29	130	2790				N/A
KPM50B		40	40.09	35	130	2610				N/A
KPM50B		30	29.33	48	160	2350				N/A
KPM50B		25	24.07	59	160	2200
KPM50B		20	20.21	70	160	2080
KPM50B		15	14.92	94	160	1880
KPM50B		12.5	12.47	113	160	1770
KPM50B		10	10.47	134	160	1670
KPM50B		7.5	7.73	182	160	1510
KPM63..,KPB63..						n1=1400r/min				180Nm
Model		i	i	n2	M2max	Fr2	63B5	71B5/B14	80B5/B14	90B5/B14
		nominal	actual	[r/min]	[Nm]	[N]
3 Stage
KPM63C	KPB63C	300	302.50	4.7	160	4800		N/A	N/A	N/A
KPM63C	KPB63C	250	243.57	5.8	160	4800		N/A	N/A	N/A
KPM63C	KPB63C	200	196.43	7.2	160	4800			N/A	N/A
KPM63C	KPB63C	150	151.56	9.3	180	4650			N/A	N/A
KPM63C	KPB63C	125	122.22	12	180	4330			N/A	N/A
KPM63C	KPB63C	100	94.50	14	180	4070			N/A	N/A
KPM63C	KPB63C	75	73.33	20	180	3650				N/A
KPM63C	KPB63C	60	63.33	23	180	3480				N/A
KPM63C	KPB63C	50	52.48	27	180	3270				N/A
2 Stage
KPM63B	KPB63B	60	60.50	24	160	3430				N/A
KPM63B	KPB63B	50	48.71	29	160	3190
KPM63B	KPB63B	40	39.29	36	160	2970
KPM63B	KPB63B	30	30.31	47	180	2720
KPM63B	KPB63B	25	24.44	58	180	2530	N/A
KPM63B	KPB63B	20	18.90	70	180	2380	N/A
KPM63B	KPB63B	15	14.67	96	180	2130	N/A	N/A
KPM63B	KPB63B	12.5	12.67	111	180	2030	N/A	N/A
KPM63B	KPB63B	10	10.50	134	180	1910	N/A	N/A
KPM63B	KPB63B	7.5	7.60	185	180	1710	N/A	N/A
KPM75..,KPB75..						n1=1400r/min						350Nm
Model		i	i	n2	M2max	Fr2	63B5	71B5	80B5/B14	90B5/B14	100B5/B14	112B5/B14
		nominal	actual	[r/min]	[Nm]	[N]
3 Stage
KPM75C	KPB75C	300	297.21	4.8	300	6500			N/A	N/A	N/A	N/A
KPM75C	KPB75C	250	240.89	5.9	300	6500			N/A	N/A	N/A	N/A
KPM75C	KPB75C	200	200.66	7.0	300	6500			N/A	N/A	N/A	N/A
KPM75C	KPB75C	150	149.30	9.3	350	6500				N/A	N/A	N/A
KPM75C	KPB75C	125	121.00	12	350	5980				N/A	N/A	N/A
KPM75C	KPB75C	100	100.80	15	350	5520				N/A	N/A	N/A
KPM75C	KPB75C	75	79.40	19	350	5040					N/A	N/A
KPM75C	KPB75C	60	62.43	23	350	4730	N/A				N/A	N/A
KPM75C	KPB75C	50	49.18	29	350	4370	N/A				N/A	N/A
2 Stage
KPM75B	KPB75B	60	59.44	24	300	4660	N/A				N/A	N/A
KPM75B	KPB75B	50	48.18	30	300	4340	N/A				N/A	N/A
KPM75B	KPB75B	40	40.13	35	300	4080	N/A					N/A
KPM75B	KPB75B	30	29.86	47	350	3720	N/A	N/A				N/A
KPM75B	KPB75B	25	24.20	56	350	3500	N/A	N/A
KPM75B	KPB75B	20	20.16	71	350	3230	N/A	N/A
KPM75B	KPB75B	15	15.88	93	350	2950	N/A	N/A
KPM75B	KPB75B	12.5	12.49	113	350	2770	N/A	N/A	N/A
KPM75B	KPB75B	10	9.84	143	350	2550	N/A	N/A	N/A
KPM75B	KPB75B	7.5	7.48	188	350	2330	N/A	N/A	N/A
KPM90..,KPB86..						n1=1400r/min						500Nm
Model		i	i	n2	M2max	Fr2	63B5	71B5	80B5/B14	90B5/B14	100B5/B14	112B5/B14
		nominal	actual	[r/min]	[Nm]	[N]
3 Stage
KPM90C	KPB86C	300	297.21	4.8	450	6500			N/A	N/A	N/A	N/A
KPM90C	KPB86C	250	240.89	5.9	450	6500				N/A	N/A	N/A
KPM90C	KPB86C	200	200.66	7.0	450	6500				N/A	N/A	N/A
KPM90C	KPB86C	150	151.20	9.3	500	6500				N/A	N/A	N/A
KPM90C	KPB86C	125	125.95	12	500	5980				N/A	N/A	N/A
KPM90C	KPB86C	100	99.22	15	500	5520	N/A				N/A	N/A
KPM90C	KPB86C	75	75.45	19	500	5040	N/A				N/A	N/A
KPM90C	KPB86C	60	62.43	23	500	4730	N/A				N/A	N/A
KPM90C	KPB86C	50	49.18	29	500	4370	N/A				N/A	N/A
2 Stage
KPM90B	KPB86B	60	59.44	24	450	5890	N/A					N/A
KPM90B	KPB86B	50	48.18	30	450	5500	N/A					N/A
KPM90B	KPB86B	40	40.13	35	450	5170	N/A	N/A
KPM90B	KPB86B	30	30.24	47	500	4710	N/A	N/A
KPM90B	KPB86B	25	25.19	56	500	4430	N/A	N/A
KPM90B	KPB86B	20	19.84	71	500	4090	N/A	N/A	N/A
KPM90B	KPB86B	15	15.09	93	500	3730	N/A	N/A	N/A
KPM90B	KPB86B	12.5	12.49	113	500	3510	N/A	N/A	N/A
KPM90B	KPB86B	10	9.84	143	500	3240	N/A	N/A	N/A
KPM90B	KPB86B	7.5	7.48	188	500	2950	N/A	N/A	N/A

Outline Dimension:

Company Profile

About our company:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.Our leading products is  full range of RV571-150 worm reducers , also supplied hypoid helical gearbox, PC units, UDL Variators and AC Motors.Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.With fast delivery, superior after-sales service, advanced producing facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.

 Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia

Logistics

After Sales Service

1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.

FAQ

1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.

Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!

 

 

Choosing a Gearbox For Your Application

The gearbox is an essential part of bicycles. It is used for several purposes, including speed and force. A gearbox is used to achieve 1 or both of these goals, but there is always a trade-off. Increasing speed increases wheel speed and forces on the wheels. Similarly, increasing pedal force increases the force on the wheels. This makes it easier for cyclists to accelerate their bicycles. However, this compromise makes the gearbox less efficient than an ideal one.

Dimensions

Gearboxes come in different sizes, so the size of your unit depends on the number of stages. Using a chart to determine how many stages are required will help you determine the dimensions of your unit. The ratios of individual stages are normally greater at the top and get smaller as you get closer to the last reduction. This information is important when choosing the right gearbox for your application. However, the dimensions of your gearbox do not have to be exact. Some manufacturers have guides that outline the required dimensions.
The service factor of a gearbox is a combination of the required reliability, the actual service condition, and the load that the gearbox will endure. It can range from 1.0 to 1.4. If the service factor of a gearbox is 1.0, it means that the unit has just enough capacity to meet your needs, but any extra requirements could cause the unit to fail or overheat. However, service factors of 1.4 are generally sufficient for most industrial applications, since they indicate that a gearbox can withstand 1.4 times its application requirement.
Different sizes also have different shapes. Some types are concentric, while others are parallel or at a right angle. The fourth type of gearbox is called shaft mount and is used when mounting the gearbox by foot is impossible. We will discuss the different mounting positions later. In the meantime, keep these dimensions in mind when choosing a gearbox for your application. If you have space constraints, a concentric gearbox is usually your best option.

Construction

The design and construction of a gearbox entails the integration of various components into a single structure. The components of a gearbox must have sufficient rigidity and adequate vibration damping properties. The design guidelines note the approximate values for the components and recommend the production method. Empirical formulas were used to determine the dimensions of the various components. It was found that these methods can simplify the design process. These methods are also used to calculate the angular and axial displacements of the components of the gearbox.
In this project, we used a 3D modeling software called SOLIDWORKS to create a 3-D model of a gear reducer. We used this software to simulate the structure of the gearbox, and it has powerful design automation tools. Although the gear reducer and housing are separate parts, we model them as a single body. To save time, we also removed the auxiliary elements, such as oil inlets and oil level indicators, from the 3D model.
Our method is based on parameter-optimized deep neural networks (DBNs). This model has both supervised and unsupervised learning capabilities, allowing it to be self-adaptive. This method is superior to traditional methods, which have poor self-adaptive feature extraction and shallow network generalization. Our algorithm is able to recognize faults in different states of the gearbox using its vibration signal. We have tested our model on 2 gearboxes.
With the help of advanced material science technologies, we can now manufacture the housing for the gearbox using high-quality steel and aluminium alloys. In addition, advanced telematics systems have increased the response time of manufacturers. These technologies are expected to create tremendous opportunities in the coming years and fuel the growth of the gearbox housing market. There are many different ways to construct a gearbox, and these techniques are highly customizable. In this study, we will consider the design and construction of various gearbox types, as well as their components.

Working

A gearbox is a mechanical device that transmits power from 1 gear to another. The different types of gears are called planetary gears and are used in a variety of applications. Depending on the type of gearbox, it may be concentric, parallel, or at a right angle. The fourth type of gearbox is a shaft mount. The shaft mount type is used in applications that cannot be mounted by foot. The various mounting positions will be discussed later.
Many design guidelines recommend a service factor of 1.0, which needs to be adjusted based on actual service conditions. This factor is the combined measure of external load, required reliability, and overall gearbox life. In general, published service factors are the minimum requirements for a particular application, but a higher value is necessary for severe loading. This calculation is also recommended for high-speed gearboxes. However, the service factor should not be a sole determining factor in the selection process.
The second gear of a pair of gears has more teeth than the first gear. It also turns slower, but with greater torque. The second gear always turns in the opposite direction. The animation demonstrates this change in direction. A gearbox can also have more than 1 pair of gears, and a first gear may be used for the reverse. When a gear is shifted from 1 position to another, the second gear is engaged and the first gear is engaged again.
Another term used to describe a gearbox is “gear box.” This term is an interchangeable term for different mechanical units containing gears. Gearboxes are commonly used to alter speed and torque in various applications. Hence, understanding the gearbox and its parts is essential to maintaining your car’s performance. If you want to extend the life of your vehicle, be sure to check the gearbox’s efficiency. The better its functioning, the less likely it is to fail.

Advantages

Automatic transmission boxes are almost identical to mechanical transmission boxes, but they also have an electronic component that determines the comfort of the driver. Automatic transmission boxes use special blocks to manage shifts effectively and take into account information from other systems, as well as the driver’s input. This ensures accuracy and positioning. The following are a few gearbox advantages:
A gearbox creates a small amount of drag when pedaling, but this drag is offset by the increased effort to climb. The external derailleur system is more efficient when adjusted for friction, but it does not create as little drag in dry conditions. The internal gearbox allows engineers to tune the shifting system to minimize braking issues, pedal kickback, and chain growth. As a result, an internal gearbox is a great choice for bikes with high-performance components.
Helical gearboxes offer some advantages, including a low noise level and lower vibration. They are also highly durable and reliable. They can be extended in modular fashion, which makes them more expensive. Gearboxes are best for applications involving heavy loads. Alternatively, you can opt for a gearbox with multiple teeth. A helical gearbox is more durable and robust, but it is also more expensive. However, the benefits far outweigh the disadvantages.
A gearbox with a manual transmission is often more energy-efficient than 1 with an automatic transmission. Moreover, these cars typically have lower fuel consumption and higher emissions than their automatic counterparts. In addition, the driver does not have to worry about the brakes wearing out quickly. Another advantage of a manual transmission is its affordability. A manual transmission is often available at a lower cost than its automatic counterpart, and repairs and interventions are easier and less costly. And if you have a mechanical problem with the gearbox, you can control the fuel consumption of your vehicle with appropriate driving habits.

Application

While choosing a gearbox for a specific application, the customer should consider the load on the output shaft. High impact loads will wear out gear teeth and shaft bearings, requiring higher service factors. Other factors to consider are the size and style of the output shaft and the environment. Detailed information on these factors will help the customer choose the best gearbox. Several sizing programs are available to determine the most appropriate gearbox for a specific application.
The sizing of a gearbox depends on its input speed, torque, and the motor shaft diameter. The input speed must not exceed the required gearbox’s rating, as high speeds can cause premature seal wear. A low-backlash gearbox may be sufficient for a particular application. Using an output mechanism of the correct size may help increase the input speed. However, this is not recommended for all applications. To choose the right gearbox, check the manufacturer’s warranty and contact customer service representatives.
Different gearboxes have different strengths and weaknesses. A standard gearbox should be durable and flexible, but it must also be able to transfer torque efficiently. There are various types of gears, including open gearing, helical gears, and spur gears. Some of the types of gears can be used to power large industrial machines. For example, the most popular type of gearbox is the planetary drive gearbox. These are used in material handling equipment, conveyor systems, power plants, plastics, and mining. Gearboxes can be used for high-speed applications, such as conveyors, crushers, and moving monorail systems.
Service factors determine the life of a gearbox. Often, manufacturers recommend a service factor of 1.0. However, the actual value may be higher or lower than that. It is often useful to consider the service factor when choosing a gearbox for a particular application. A service factor of 1.4 means that the gearbox can handle 1.4 times the load required. For example, a 1,000-inch-pound gearbox would need a 1,400-inch-pound gearbox. Service factors can be adjusted to suit different applications and conditions.